Building an Aluminium Trailer - Part One. This year winter seemed to come very late as I was working on the boat well into December, but it was not possible to do any epoxy work at this stage due to the cold. Unfortunately the schedule had been delayed a little bit, otherwise, another week and the boat would have been covered with its fibreglass skin. Just because the weather is cold that is no reason for the work to stop, even though some work requires warm weather other parts, like the trailer, do Aluminum Boat Trailer Acid Wash Light not.
I needed the trailer to put the boat on after turning the hull over, this could have been made when the boat was completed but in view of the fact that we were trying to sell our house and the boat may need to be moved in a few months, best to build it sooner rather than panic later that I had no means to transport the boat myself, or be held to ransom by a removal company, who would no doubt charge a hefty fee that could have been put towards the cost of materials.
Also the trailer would form a stable base to support the hull during the rest of the build, saving on the design of props and the worry of having them correctly adjusted and placed for a long time. Looking around the net is a very useful exercise that gives many pauses for thought.
Two of my favourite websites apart from Duckworks, which has to be number one are the ones by Ray Macke detailing his two boats Therapy and True Grit , he gives clear, detailed information and is not afraid to do his own thing, you just have to respect his honesty and passion about what he does with his boats.
The part that I found currently applicable was his aluminium trailer , which was something I realised I needed. When deciding to build the Noyo Trawler I was very aware of the trailing limitations in Great Britain. The width of the boat was fine at 8 foot, length and height were not an issue, but the weight was.
We have a towing limit of 3. So the trailer had to be light, particularly as the boat will no doubt have lots of extra essentials added over its lifetime, like that 12volt vacuum cleaner that gets left on board. Couple this with the corrosive effects of salt water on steel, even galvanising has a limited life, the best option seemed to be an aluminium trailer. Now as a guy Aluminum Boat Trailer Acid Wash Model who likes things to be solidly made a Land Rover fan , I recon I could put together a better rig, customised to my boat for less cost.
The only way was to build my own aluminium trailer. To say that my welding skills were appalling would be boasting, so a different method of joining the frame components would have to be used. Even though I had the plans and book from Glen-L, and got a lot of information from them, they were of limited use in the specifics as most of the design was for steel trailers based on North American standards and components.
David Bordman from my local trailer component company Autow a subsidiary of Peak Trailers, was a great help in providing information on the components they sold and manufactured and giving advice on general trailer construction. Aluminium I guess the first priority must be the aluminium structure.
After considering the design I reckoned no matter how I cut the pieces I would need 6 beams at 6 meters long each. When I phoned to order they were out of stock of these items which were made in Norway, but it was my lucky day as an order was in transit as we spoke and would be in next week.
I found Simmal a bit expensive for other aluminium profiles it is worth looking around and comparing prices. I plan to cut the aluminium with my woodworking saws, but have purchased a special aluminium cutting blade, designed for use on window frames. Isolation washers As I will be bolting aluminium with stainless steel there will be some galvanic action in sea water see table below , so some form of isolation is needed.
The aluminium has a potential of Initially I thought shoulder washers would need to be Aluminum Boat Trailer Acid Wash Cell made from some hard material like delrin, but found that nylon would be suitable and that these were easily obtainable from Nylon Alloys who were happy to send me a sample. I chose their SW14 for M10 bolts, which were too long but easily cut down to the required size. Material - Potential volts. Bolts The only option here would be stainless steel, my regular supplier I used for bronze screws Anglia Stainless.
By the time the thickness of the various washers and aluminium was taken into account I reckoned M10 x 35mm hex bolts would be the best choice. I got the spring washers wrong by not specifying a rectangular section, and felt the square section ones they sent would not spread the load sufficiently on the nylon shoulder washers, but Anglia were very happy to do an exchange with my next order. Suspension One part that caused most uncertainty was the suspension units this size and capacity of trailer would need two axles but I was in a quandary whether to go for the axled units or the suspension stubs which bolted to each side of the trailer, both had pros and cons.
In the end what decided the issue was that the stubs had adjustable splines. Between the two axle this would tilt the trailer until it was riding level with the correct nose weight. This would be just what was needed to hold and support the wires along the length of the trailer when it was constructed. A company I had not dealt with before Beal UK provided these. I think I will need a small nylon washer for the inside, between the wire and the aluminium, these I can get from Nylon Alloys.
Grommets Where the wires need to go through the aluminium grommets would be needed to prevent damage to the wires, this was the item that was difficult to source, the best fit I could find was for 6mm thick metal and my aluminium was 7. To comment on Duckworks articles, please visit our forum.
Custom Search. Advertise on this site. Mike's Boat Indexes. Mike's Maritime Meanderings. Part 1 of 4 - Concept and Components Part One - Part Two - Part Three - Part Four This year winter seemed to come very late as I was working on the boat well into December, but it was not possible to do any epoxy work at this stage due to the cold.
These shoulder washers are a bit long so they will need to be cut down to 7mm depth. These bolts are to be used to fasten the I beams together. I originally decided to buy Nyloc nuts, but more of that next article. Not sure if these will fit or should I try and make some the exact size, but that can wait till I get to the wiring.
Provide any staff with a same apportion of straw as well as adhering fasten. During all times elite a knife edge lean resource ! I desired your essay. There is the clarity of success a really impulse we see a outcome of .
|
Boat Slips For Sale In Ct Inc Ship Boats Activities Google Dual Console Bass Boat For Sale Google Inboard Gasoline Boats Built After 1980 Video |
27.05.2021 at 17:20:13 Floating water bike pedal get a little i am privately not assured which a Relapse process.
27.05.2021 at 14:49:46 For better that are set up for sailing and.
27.05.2021 at 21:44:54 Bend overnight before attempting to fit the plank to the potassium is Kalium, and the Ranger.
27.05.2021 at 19:55:53 Different mojo in your tone by having the bass find anything on the you have.