MasterCraft | Wakesurfing Boats | Wakeboard Boats | Ski Boats

Post by freeskiwake � Sun Aug 13, pm. Post by downunder � Mon Aug 14, am. Post by freeskiwake � Mon Aug 14, am. Post by rynhardt � Mon Aug 14, am. Post by downunder � Wakebooard Aug 15, am. Post by buils � Tue Aug build your own wakeboard boat question, am.

Post by faklord wakrboard Tue Aug 15, quesstion. Contact Imprint Advertising Guidelines. Forums Videos Spots Logout Register. First wakeboard build Here you can exchange your experience and datas about your home build boards. First wakeboard build Post by freeskiwake � Sun Aug 13, pm Hello, I am new to building wakebpard and new to composites too, so I decided to build myself one wakeboard. Idea and materials came to me one year ago but did not make time to build board in summer I only made rocker table back.

I got some boah good informations how to build the wakeboard from forum member Zobso thanks a lot Zob that was one year on. I decided to buy paulownia cores and searched the internet. I found one company that specializes in making cores from paulownia build your own wakeboard boat question 40 mins away with the car.

I got paulownia wood cores for wakeboard for fair price, when i got there forklift was lifting like 2 packets of paulownia cores like cores on the truck, serious business. I just got three of. My build plan is- Ptex 0. First I draw the board in drawing program and printed out the plan. Than I made a model of shape from paulownia wood.

After shaping builv hand i copied one core to another with router and copy router bit. Than I made heating chamber for attaching sidewalls to the core. Sidewalls bonded really well with the core. Build your own wakeboard boat question sanded and heat treat. One picture in the "oven". I made a planning table for the router. I managed to make the middle of the board 10,5mm thick and tips are 6,5mm. Took me a long time for precise routing. Build your own wakeboard boat question Obat routed out fin holes.

After Build your own Build Your Own Wakeboard Boat Kits wakeboard boat question poured onw epoxy in fin holes I made holes for inserts. I poured epoxy with inserts in. Wakeboars I made vacuum press. I have vacuum tank and three fridge compressors, to run each for three hours safe backup. Rocker table i had from one year. Firstly I laminated bottom of the board. One that picture ptex is secured in with a little bit of duct tape and fiberglass is all wet with epoxy. Everything went smooth and good for beginnerI was all hyped than worst fear came true.

Here looks all fine in the press. Really frustrating. In 1second I lost all the motivation, I know that it is the first board and can not be perfect but why this happened. Thank god its not too much air gaped so it is still possible to ride it, but with bitter taste. How did that happen??? Board was laminated better questioon I expected only that 25cm of the board is total disaster waves???

Does anybody know why did that happen? I was really stoked about that amount of rocker with only bottom side laminated. Is not the top side qyestion the lamination the key to rocker not the bottom one? So why I ended with so much really good rocker???

Now I have two questions does anybody know why bukld happened in the bottom. I made a mistake and vacuum hose was pulling in much bubbles of epoxy and epoxy itself, didnt know that it will pump epoxy like crazy. It was pulling a lot of air from the epoxy is this normal? I tripple checked for any holes or leakage in the vacuum foil and didnt found any and pump was drawing good vacuum too What i did wrong here? How to prevent epoxy from going wakboard vacuum build your own wakeboard boat question Other question Build Your Own Wakeboard Boat Journal is if I have now enough rocker with only bottom side laminated boa to laminate the top side to build your own wakeboard boat question increase any of rocker???

Do Wakeborad lower the rocker table to 6cm of rocker to fit the current state of board and laminate it like that and it will stay at 6cm? I have really no idea. I am afraid to put it back in in 12cm of rocker table and wakeboafd i would get no needed more rocker or what? Onw will try to finish the board and test ride it, hope that waves on bottom side do not have too much effect But still do not wanna to throw away my first board, I putted a lot of effort build your own wakeboard boat question it and I am learning and make mistakes.

Have a nice day! Re: First wakeboard build Post by downunder � Mon Aug 14, am That is ok, don't be too harsh on yourself, you did a great job!

I remember my first board, man, so much to builr Basically, your sheet folded straight after you placed a core iwn it. I think that there is no way to control this with your setup unfortunately. This is coz the fabric on bottom is compressed and not tensioned as on top.

See how this is not seen on the excess around the board? If can't be seen, can't be fixed, so no matter how much build your own wakeboard boat question checked anything else in my opinion. This is the reason I never, ever glass the bottom on the rocker table. Others might build your own wakeboard boat question a different approach but I think with a vac, fabric can fold at any time, anywhere, typically questipn the middle.

To be fair, not sure where you picked up the info about wakeborad the bottom first?! Hope it wasn't Zob Glassing bottom first and leaving the top wakeeboard latter will always crease your fabric. Really, it's it that simple. You control the board rocker with the top glassing, not. The Holly mantra of applying a top sheet s is a mechanical press. Zob is using a press if remember. I would suggest to try peeling it off before using. The board will take moisture in the creases.

Re: First wakeboard build Post by freeskiwake � Mon Aug 14, am Oh I see I screwed up So now there is no good to try laminating now the topsheet on the board? By peeling it off you mean peeling off the whole FG and ptex from the bottom and do it again? Will moisture entre the board even when epoxy is quite well in the place of sidewalls where waves are? I was planning to just try laminating FG and topsheet on rocker table uqestion adjusted to 6cm this would not work?

Now i have a question how do you get fibres from the clothes when cutting and sanding FG, or its time to just throw away that wakbeoard Have a nice day. Even worse, on first jump, the board might break on exactly that spot. To prove this, try to compress the void with something, apply good force. If even slightly cracks, that's it. Hence, I would peel it off completely, with a spatula or.

Did that on one core quite successfully. A lot of work, but hate to bin a good core. Loose fiber just build your own wakeboard boat question. PS I see you did the straps inserts half. That is not good. The force on inserts is brutal.

In my view, not only that they need to go all the way, but the SS inserts need to be reinforced with a bit of FG so they resisting pulling out and staying put.

Basically, this is the weak point coz all inserts holes are in the same line, no much 'meat' on wood for inserts to 'bite' in. By inserts I mean a proper SS inserts, not epoxy. You can find them. Build your own wakeboard boat question First wakeboard build Post by rynhardt � Mon Aug 14, am First of all, congrats on your progress so far! There are many little ow on the road to success, don't give up!

It really is worth it to test your process on scrap pieces before committing a full board. Even then, shit sometimes happens.

This website uses cookies to enhance and improve your browsing experience. Roughneck Roughneck Deluxe Tiller. Center Console. If you build your own wakeboard tower and attach it perfectly to the wake board boat then there is no qoute but if there are flaws in the fitting or construction of the tower, it may corollary to serious injuries. Stinger Popular Articles Related Articles 1.

Check this:

Do we suspect balmy could be an suitable hull. Oh my gosh. 10 8 6 4 2 0?



Charleston Sightseeing Cruise Management
Average Speed Of Pontoon Boat 98
Divya Bhatnagar Of Yeh Rishta Kya Kehlata Hai Wah

admin, 02.08.2021



Comments to «Build Your Own Wakeboard Boat Question»

  1. JAGUAR writes:
    Colored curing agent helps bring out given been.
  2. Polat_Alemdar writes:
    Admission to the usually ??it creates it dangerous the.