Diy Canoe Building Plans Meaning

Bass Boat Conversions ideas | bass boat, boat, jon boat

Depending on your creativity, skills, and time, the limits to what you can do to a Jon boat are almost endless depending on your imagination.

What I decided to do was gather as many ideas for Jon boat mods as I could from looking at forums, Pinterest, YouTube, and Facebook and compile them into this mega guide of Jon boat modifications, plans, ideas, photos, and videos.

Below are some of the most ingenious deck mods I have seen online. This guy will be fishing in style no doubt, with everything he needs in handy reach of the seat. With a raised deck, rod holders, and pedestal swivel seats, this guy is going to make some serious catches during the fishing season.

If you want to know what seats were used in this Jon boat modification project, click here bbass my guide to Jon boat seating. This Tracker is just stunning, and can handle 2 people with ease. If you go any smaller with a raised deck, then it could become unstable, but I have it on good authority that this one handles basss perfectly. Once that carpet goes down this is going to be one hell of a modification.

Just look at it! Check out this example of a 12ft Jon boat deck modification. The deck is split into 3 parts, with ample room for diy jon boat to bass boat up feet with swivel chairs and rod storage to the sides.

The seat on this one looks quite high up, but you have to assume that the owner made sure the boat was stable before he got to work. This looks extremely stable, and has room for 2 to fish, despite the small deck size available. You can pick up cheap carpeting for a project like this from most hardware stores.

The stability bot this fishing set-up looks a bit more to my liking, as the seats are set a little lower on the deck. Image from www. This guy likes straight lines and flat surfaces.

You could probably flip this Jon upside down and it would still float, given how the top resembles a flat-bottom well.

Speaking of bass fishing, how about some more examples of Jon boat mods for bass fishing where the the set-ups have been completely customised to help you get the best catch. In this example, the guy added spray-in liner he used 2 gallonsrod T bars, hangers to hold the jig boxes, vertical rod holders gass PVC piping, then space for his fish finder.

But who cares? The upshot is, it works, and he diy jon boat to bass boat up every time he goes bass fishing. Perhaps the grass carpeting could work for duck hunting camouflage too! What I love about this diy jon boat to bass boat up is the moment I saw it, diy jon boat to bass boat up first thought was how great that cooler could be for beer. At the very least, you want a green paint job when doing any form of Jon boat duck hunting modifications.

Keep scrolling for some better examples. PS: You might also be interested in my recent article that explains how to paint an aluminum boat. And here it is! An amazing modification where the camo shades and styling have been taken to the next level. Check out the camo grip flooring, camo deck mods, raised seating and. I love it, I really love it. This is absolute class. You can just imagine how you could kill the motor and sit in wait amongst the reeds in this awesome little Jon.

If you do decide to go down the camo route for duck hunting, you should also plan to get a duck blind in place as part of your modification project. The video below shows you just how you can do that on a 12 foot Jon diy jon boat to bass boat up. But what about the most essential part of the modification plan, the camo?

Bat take a look at the great ideas for deck and storage modifications. Can you voat how much it will have increased in value since then?

The owner could keep doing projects like this and flip the boats on Craigslist � makes a nice little side earner for sure! In this video example, you can see how a guy added a trolling motor, front seat, livewell and cooler, livewell pump, rear seat, seat diy jon boat to bass boat up, bilge pump, and rod holders. The result is a great set-up for bass fishing in creeks, small lakes, and bays as long as there are no waves!

Here we see carpet seats, rear casting deck, cooler, fishing rod hass, and also bungee cord mounts so all the gear can be stripped. He also made mounts for a basx hand fish finder, with additional storage space added under the rear casting deck space.

Here are some foot Jon boat modifications that you can. It includes some photos which give you a good idea on how to plan your own DIY project, some videos with step by step guides, and some of the best examples I have found online for 12ft Jon boat modifications. This is one of the best YouTube videos I have found that focus purely on modifying a 12 foot Jon boat.

In this short 5 and half minute video you see the guy making reinforced storage compartments and a live well space, applying carpeting to a homemade plywood deck, mounting a trolling motor, and placing seating ion. In this stunning video you can see the modifications and customisations made to a Tracker Jon boat. Apparently it took a few months, as each part was purchased or made bit by bit.

It looks amazing at the end of the video reel. One of the most popular modification projects is a conversion from a Diy jon boat to bass boat up to a bass boat. In this 21 minute video you see just how you can do it. In this YouTube video the guy has put together a slide show of all the mods he has made to his footer.

This 14 foot Tracker was bought from new. At nearly 17 minutes, it gives you a great idea on what is possible diy jon boat to bass boat up a Jon of this size.

I believe that the best custom projects are where you modify an old and un-loved Jon into something new and fresh. Everything was ripped out with a new deck being built from plywood, with outdoor carpeting added.

It even had a CD player fitted, a lick or paint, and it was good to go. I started out with just a 14 ft. Jon boat that was made in As you can see, there is still some work to go, but baas shows what you can achieve with even the oldest of boats that you can pick up used for cheap. He decided to take his boat and convert it into an electric-powered version. The boat in this video was a 14ft Tracker Topper. I love it! Because of that, you will see a huge range of Jon boat seat mods where guys rip out the old jpn install their own set-up.

Whether you want a bench, a pedestal, or a swivel, here are some modifications to seating that could work diy jon boat to bass boat up you. All of the new seats in this guide you can see reviewed and rated in my guide bozt the best Jon boat seats.

If you buy this Crestliner below, you might not even want to make a seat mod. This stern seat could be just what you are looking. In this DIY project, round holes were cut into the benches, then, tapped and threaded. Plates were installed to mount the swivel seats onto. You can see more photos from this custom Diy Jon Boat Blueprints Ltd seat project plus more ideas in my guide to seat mount ideas.

The mount is very sturdy, and you can replicate it yourself using the tto review found in my mount guide. In this idea, see how the guys has installed a pedestal seat on his Jon boat to get a really high fishing and vantage point. You can buy clamping seat systems and fit them quite easily to your boat see prices.

When doing any modification project, you need to be aware of weight limits and stability. There are ways in which you can improve the stability of your Jon, but there will be a weight diy jon boat to bass boat up that you should not exceed. The smaller your Jon, the bigger this issue can be. Boa you should have an idea on what you want to achieve, look for some plans online, or follow some of the great videos on YouTube.

Pin 4K. Image from bassresource. Image from pinterest. Image from alfa-img. Image from youtube. Image from crappie. Image from free-boatplans.

Image from bassfishin. Image from jjon. Image source unknown. Related Posts. April 5th, April 1st, February 26th, February 22nd, February 19th, Go to Top.

Main points:

A 6. All cells have the revive march of. Sincerelyversatile as well as multipurpose folding kayaks have been used for travel.

Start to overhaul the boat by unscrewing the old screws and unlocking the nuts on the bolts. If they snap, you have to use a special tool to pry them out of their holes. Keep all the screws and bolts that you have taken off. You need them to determine the sizes of the new screws and bolts that you need to buy for replacement.

The next step in our jon boat to bass boat conversion is to sand the boat. The worn and soiled surface of the boat must be sanded both inside and outside. Use no. Sand all surfaces including the nooks and the crannies. If there is old paint, remove all the loose paint. Remove all dirt and dust on all the surfaces of the boat as Diy Bass Boat Deck 500g well. Also, vacuum all the open surfaces, if you need to.

Before painting the boat , ensure that there is no more dirt, dust, old stripped paint, oil, and other stuff that will cause the new paint coat not to stick on the surface. Seal the surface and all possible leaks by coating the surface with black epoxy.

Apply the first coat and let it stand for 15 to 20 minutes. Then apply the second coat. Wait for another 15 to 20 minutes for the paint to dry, and then apply a third coat.

Or instead of a third coat, you can apply a clear coat. To protect the inside of the boat, you can also paint it with a grey epoxy finish to seal the boat and prevent water penetration. Now, that the boat is painted, you can put in whatever instruments and equipment you want inside.

Your boat surely needs some better seating accommodations to complete the conversion from jon boat to bass boat. You may want to install swivel seats two would be good , or one or two benches, depending on your budget.

In this final stage, you can also install a deck. To install a deck, some basic carpentry skill are needed. A video is best to follow for this process. See the below video for a great demonstration on installing a deck on a job boat:. The following 10 tips below are helpful to keep in mind when doing a jon boat bass boat conversion.

These tips can help you save money, time, and energy. If you are buying a jon boat for your jon boat bass boat conversion, it is important to choose one with the right size. Get an old wide-hulled jon boat with a size that fits your plan. Be sure that this jon boat fulfills all your desires for a bass boat because this will be the base of your boat. Everything from here on will depend on the conditions of the base of your boat.

You should choose a wider hull because you will have more freedom to do things that you want. If you get a narrow hulled boat, you will be limited in your options. It will also be very unstable on the water when you install a deck on a narrow boat.

The point is: the wider the hull of the boat, the better. Yes, you want to economize. Safety, when converting a jon boat, should be your number one concern. You will be using the boat out in the open water so you will want to ensure the safety of you and your friends and family. If you want a used boat, give it a full and thorough inspection. You need to strip it down to its bare bones to check if it is worth your money.

Check for weak spots, holes, rotted woods, rust, and so forth. If you want a new hull, look for the strongest and toughest one that you can afford. A heavier hull is better than a lightweight hull. Jon boat to bass boat conversion is not a light thing. The full conversion process takes a fair amount of time, effort, and money. So, be careful in choosing your base boat.

Tip 3 when performing a jon boat conversion is to use aluminum for framing. If you are a DIY-type-person or have some experience in working with aluminum, this tip is meant for you. Aluminum is lightweight, so if you use it to make the framework of your boat, its weight will also be lighter.

That would result in a lot of benefits when you are already using the boat for bass fishing. In terms of durability, aluminum tends to last longer than wood. Wood that is not pressure treated tends to soak water and tends to become heavier than its original weight.

On the other hand, pressure-treated wood is not good to use because it contains certain chemicals that harm aluminum. So, your best option is to use aluminum for your framework.

If you do it right, an aluminum frame will be a light build that offers a durable and long-lasting service life. There are certain chemicals in pressure-treated wood that react with aluminum in a harmful way. They can cause corrosion, and in some instances, pitting or small holes in aluminum, weakening the hull of the boat.

You can also form a barrier between the aluminum and the wood. You can get high powered trolling motors that can be easily dismounted and trimmed. The trolling motor on a Jon boat is steered by a tiller action. Obviously this is impractical on a bass boat. You must therefore add remote steering to the outboard. Follow the instructions in the video below to easily and quickly fit a steering mechanism to an existing motor. Always get an outboard motor that offers power assisted tilt and trim so that you can enjoy superior maneuverability when in shallow or obstacle-ridden waters.

Opt for teflon-coated steel, altering diameter and changing pitch to give a marked boost in performance. You will instantly notice the difference between this type of prop and the one you probably have on your Jon boat currently. Make sure your prop is capable of propelling the extra load from your bass boat conversion add-ons by attaching one with an increased number of blades.

Bass boats accommodate the angler with decked areas from which one or two anglers can cast off while standing up without overturning the boat. Obviously a Jon boat differs greatly from this with its open deck area.

The good news is that the flat open deck on a Jon boat lends itself well to the installation of level decked spaces. This deck area can also be carpeted for added comfort, a better look and additional grip underfoot.

Jon boat to bass boat framing projects allow you to create plywood decked areas that are supported within the hull of the boat by a metal or wooden frame.

You will need to carefully consider the distribution of weight in the boat to ensure you will retain stability on the water. Too much weight can dangerously affect your draft and increase the risk of being swamped or even capsizing.

Unfortunately not every Jon boat is suitable for decking. Some smaller Jons are just too narrow, and those with flat sides can find these to be a disadvantage during the conversion process.

Jon boat framing projects can also be used to create bespoke storage that can enhance the utility of your space. A well planned design can incorporate spaces to stow your gear, hide your battery and create live fish wells.

Adding these type of storage upgrades will truly transform your Jon boat into a fully functional bass boat. The great thing about the flat hull of a Jon boat is that it provides pretty level seating for one, two or even three anglers.

But, the hard basic molded bench seating cannot compare to the comfort and luxury of high-back bass boat seating. What you will lose in seat capacity from your conversion you will gain in comfort and functionality. Most Jon boat owners will automatically want to remove the standard bench type seating in their Jon boat to make way for high-back bass boat seating.

We do not advise this! Instead of removing the bench seats in the Jon boat use them as support for your new decking and as mounting points for your new high-back seats. All boats used at night should be carrying the legally required navigation lights for safety even small kayaks must adhere to this law , but some additional creative lighting can boost the appearance and utility of your boat.

If you love to go night fishing or idle on the water after dusk, creative lighting options will mean you can keep visible and move about safely on the deck of your boat. LED lighting is low energy and easy to install meaning that you can create a range of custom lighting effects with ease. There are 3 basic types of light installations you will need to consider adding to your Bass boat conversion.

In the video below you will see how easy it is to install hidden deck lighting on your Jon boat to match the look and functionality of a more expensive bass boat. Being seen at night is not the only reason to install lights on your boat. You also need to be able to see. Just as navigational lights are installed at the back of your boat so others can see you, night lights or search lights should be placed at the front of your boat so you can see where you are going and what is in front of you.

Once you have finished installing your boat lights you may want to consider adding some extras such as additional electronic equipment. There are a host of different accessories, like these , that can turn your Jon conversion into the ultimate killer bass boat. As a bass boat is a fishing vessel installing a high grade fishfinder as we showed how to do here at the least is advised.

If you are skilled at DIY projects and have done work on your boat before then you will probably already have all the skills you need to make all of the above conversions and turn your Jon into a kick-ass bass fishing vessel.

Aluminum Boats Bass Pro Shop 20 Good Books Publishing Program 10th Ncert English Notes 5 Pdf