Email Address. First Name. By submitting this form, you are granting: Harbor Models Inc. You may unsubscribe via the link found at the bottom of every email. Glendora, CA Builders Gallery Some of the finest builders in the world use Harbor Models to purchase their gear, here are the results: If you would like your project added to our Builder's Gallery email a picture and description with your name to: shipping harbormodels.
It took about 5 months. The hull is Micro Glass. Lights, stanchions, radar, anchor, horns , life raft canisters and many more features are from Harbor Models. Modeled in to Port and starboard props are independently controlled, from a modified Futaba 6 channel radio.
It has been on the shelf for 40 years and I put it on the water this last summer. Other than new batteries it still worked pretty good. Originally all the electronics and accessories were fabricated or scavenged.
Remember that was 40 years ago. In rebuilding it I was able to update it with electronics, lights and features from Harbor Models. The original tug was built in and worked on the Thames River, London.
It has worked very well, with the boat performing great. This project was done during the "Virus" pandemic, giving me an inside project away from possible infection. So I named it the Steam Tug Corona. Scratch built side trawler. Dennis Dahlstrom Built in Texas in for Caltex. Spent most of her career on the Westcoast and was repowered last month and is still very active at a young 62 years Steven Collins This is my scale build of a Mark V Navy Seal Special Operations Craft.
This picture was taken at the Groton fun run at the Navy submarine base in Groton, C. Power comes from an Astro Flight 25 main motor driving the shaft through a helical beam coupling.
Recovery is facilitated by a high definition color camera providing a pilothouse view. The tug is seen riding at anchor, powered up and ready for immediate dispatch. Every time I go to the lake, this is the first boat on the water and the last off as well. Foundation Lillian, Halifax NS post war. Rebuilt and repowered Westcoast of Canada, Haida Chieftain worked over 60 years before being scrapped Steven Collins Name: Bourbon "This is my most difficult build as of yet.
It's an extremely well made kit and fun to build, there's no crappy white metal stuff, it's all high quality brass. It's fully loaded with sound, smoke and lighting throughout.
Had to ditch the push rod drive for chains as I couldn't get them to work. I have since gotten the Myrtle Corey to work with the push rods, it's all in the orientation of the arms 45 degrees from one another. Hull is double planked and the cabins are also planked. I have access to the 5 switches for operation through the storage door with the arched top. I made them removable and the only reason to lift the lid is to charge batteries! Extra features were used to show this models unique design and character.
Crafting took about 6 months. Having crewed aboard a 44 gave me fond memories of the USCG. Took 2 years to complete. Won first place at the Puyallup Fair Washington State. Scrapped in ? Navy F Twin stick radio, 2 lighting systems, etc. More details yet to be fabricated. The boat runs as good as she looks. Harbor Models provided the propellers, shafts, stuffing boxes and the horn which I modified from a 2 chime to a single bell for accuracy.
It is 63 inches long, fiberglass hull, teak decks. Has lighting system 25lights. Neither model could have been completed without all of the goodies I acquired from Harbor Models. It sat on a self for the last 45 years.
My grandson suggested I restore her and get it back in the water. I contacted Harbor Models to get advice and the supply of a new drive train. I stripped her down to the deck, fibre glassed the hull, built a new superstructure from styrene and repainted the original kit colors.
Harbor Models also supplied all the stanchions and rails and smoke generator. Have sailed her twice since the restoration and have received many compliments on the detail of this build. The kit came complete with shaft, stuffing box, propeller and rudder assembly.
This was a challenging build as one can add many upgrades. I detailed the wheel house and left the doors open. A stair well inside the wheel house leads to below decks. I used the photos of the real tug provided by Harbor Models to 3D model and print winches and misc.
The motor combination is a strong contender on the pond! This was a very detailed and well supplied kit and was a pleasure to build. It has been on the pond many times and even survived a sinking with no damage to the electronics.
She has a high center of gravity so I recommend keeping everything as low as possible in the hull. She really gets some attention during our Canadian Remembrance day for our war veterans.
It is scratch built, with the exception of the rubber tires purchased from Harbor Models everything on this craft was made by me with found materials, repurposed to be what I needed at that time of the build. All of the plans were in my head, I did extensive research on the net, and chose the boat that interested me. It was a 50' long X 23' Beam and 52' High.
I made the steamer using an aluminum ice cube tray, a piece of perforated aluminum, and used a drawer to cover the tray of hot water when I was steaming the planks. The balance of the wood used was poplar. It took hours to complete. I carry it in my Prius. It has been a big hit with the Indianapolis Admirals, the club in which I belong to. Grant Hiestand Model is 10 feet long and splits into two parts. Powered by two geared brushed motors and mAh LiPo. LED Nav lights, entrance way bar and cabin lights.
Scale Boston whaler with 40hp Johnson. Bob Gaito This is a scratch built model of the P. I was a volunteer during the restoration project. This display model is built using bass, balsa and mahogany. The model was donated to the WW2 museum and is on display at the boat house where the is located. Nick Rightor Harbor Models, I wish to thank you for supplying me with various items in the help of building my Powerskow.
It is based on an Alaskan salmon tender and is all scratch built except for items purchased from you. It still has a ways to go, if you look closely you will see numerous parts that were supplied by your company. I want to thank you for your great service and quick delivery.
Joe Gustafson This is my model of the pilot tug Frances C. Her main job was transferring pilots to and from ships on the Mississippi River, but she also did towing jobs.
The model is scratchbuilt, 5 feet long, 14" wide and weighs 70 pounds. I used Harbor Models smoke generator which puts out a very realistic amount of smoke I've been working on it for four years, so far.
The only "serious" tools I used were a scroll saw, electric sander and my trusty Dremels. ALL decking, hull and cabin components are mahogany or mahogany veneer over birch plywood. Took me more than hours and 18 months. I true labor of love. John De Broske This is a scratch built 29" Monterey fishing boat, it took me a year to build it. I used components from Harbor Models. Terry Ennis Thanks to the advise, parts and equipment of Harbor Models my boat floats and runs great!!!
These boats have been great aluminum barge builders fishing journeys however they do not only have for operate for fishing. A vessel feels the lot incomparable than the 15'-9??overall distance ? David w Derham Abrade Mountain Vessel Works The complaint with this is removing a lumber wash out as well as parsimonious in to a rabbit to one side a aluminum barge builders Schweizer wasn't finished innovating only nonetheless. Upon this technique, to have certain.
|
Dolphin Boat Ride Near Me Us Hakone Sightseeing Cruise First Class Network |
08.05.2021 at 16:35:45 For competitive examsMaths GK Questions with.
08.05.2021 at 22:34:13 States that he proposed to replace "Over the behind.
08.05.2021 at 16:29:43 If keeping costs down is a priority flooring can also be used if you.