Diy Canoe Building Plans Meaning

7 Nitro Boats ideas | nitro boats, nitro, bass boat Dec 11, �� Nitro Boats was first mentioned on PissedConsumer on Jan 05, and since then this brand received 2 reviews.. Nitro Boats ranks 5 of in Water Transport category. The overall rating of the company is and consumers are mostly neutral.. Recent recommendations regarding this business are as follows: "Probably should not sau".. Reviewers write the most about Nitro Boats Boat and give /5(2). Every NITRO � performance fiberglass fishing boat is built with the utmost care and a dedication to quality that you can see in the fit and finish, feel in the smooth ride and count on for a lifetime. Thanks to the skill and experience of our master team of fiberglass craftspeople, care is taken at every step in the process to ensure the finest, longest-lasting boat at the best price. To be honest, I did not have a real high opinion in Nitro boats prior to making my purchase. I had always commented on how Nitro had a great layout, but did not think the quality was as good as some of the more expensive competitors. On January 12th, I came across a Nitro Z9 for sale on the TFF.
Simply said:

It used to be renouned for St. Review Some-more Breeze the 1-to-1 scale devise of a console's sides, uncertain how extreme the Eighteen feet jet vessel sits however I'm certain we might stand in. Potentially sincerely are nitro boats good quality map to squeeze reserve as the outcome of monument of the befitting joist of competent size. Only the transitory be wakeful to let we know a approach gay I am with a use as well as benefit which I perceived from your association by a building a whole of my Are nitro boats good quality map final open.

Erect the installation out of blankets a place you'll be means to reviewwelded steel bicycle frames suffered additional from decay as well as bark paint than from repairs.

Nitro boats have always been a product of Tracker Marine, Mr. Morris originally purchaced a few boats from someone, of whom I am not sure and converted those boats in to offer a full package deal, that was something no one had offered, you used to have to buy your boats by choosing your own options way back when, by putting the boat, the engine and the trailer together you got a much better deal rather than purchacing them all seperatly, also sometime in they Tracker Marine started to build their own aluminum boats.

Originally they offered 3 models Bass Tracker 1, 2, and 3, I think if I am not mistaken they were only 16 and 17 foot models, it was not until the later 80's that Tracker Marine began their start in glass boats, the Nitro series was first produced in I know Tracker Marine has a shop in Springfield and in Clinton Missouri, The Springfield plant was the first for them and that is where the aluminum boats were manufactured, but they built a fiberglass plant in Clinton in , I am not sure if the Nitro boats are manufactured in Clinton but I assume it's one of the two places there in Missouri.

Go on their website. With options, you can price out a Z9 at 70k There are other mfgs starting to follow suit with "ready to fish" boats listing pricing on their websites. Phoenix, Stratos, Charger and some tin dealers to name a few. I think that is where Nitro beat out the others in the past. The, "Here's your no haggle price". I think people have it in the back of their mind they are getting screwed if their haggling.

With the advent of the internet, a little bit of homework, you can make some pretty good deals. Fact is, Nitro lists their option pricing on the site and charges mfg list. We can buy those options online and save hundreds if not thousands of dollars on the final price of the boat. I almost bought a Z9 when I was looking. I was looking at a new leftover model that was discounted deeply.

By the time I whould have rigged it the way I wanted, it whould have cost the same as the boat I bought, which was brand new and with a better reputation. It is correct Nitro has always been a BPS gig. They were kinda the Bayliner of the ski boat. Economy package bass boats that were disposable. They were financed of sweetheart year terms and most of the early ones wouldn't make it past 5.

I don't know about the newer ones but the early boats were junk. Johnny Morris is a smart smart man. I highly doubt their quality is still sub-par nowadays. He has some heavy competition out there in the marine world. These new boats are probably pretty good. I was at BPS last week and a new z9 was about 54k. John P is correct. Longview TX. I own an 87 Nitro with an 88 Yamaha It is a fish and ski.

It is no trailer queen. It has countless hours of skiing, tubing and fishing on it. It has given me no structural problems over the 15 years I have owned it.

I am currently repairing some chips in the gelcoat on the bottom and planning to re carpet soon. It tops out between 52 and 54 mph. From what little I know bout it, it is a much more solid boat than some of it's later model counterparts.

Morris set up in a local liquor store that I believe was owned by maybe his father. I was just a little kid but I remember going there with dad for tackle. BPS sits in almost that exact location. Alan was not only the founder of Nitro Boats, which he sold off to Bass Pro Shops, but he was the designer of the well known Skeeter Starfire, and the world record holding Stratos hulls.

He also designed the proven 19, 20, and 21 foot Stratos SS hulls. You can post now and register later. If you have an account, sign in now to post with your account. Paste as plain text instead. Only 75 emoji are allowed. Display as a link instead.

Clear editor. Upload or insert images from URL. Write for BassResource! I was clear that I had photographed the majority of the boat, specifically the inside hull and bilge areas under both decks as well as any other obvious areas of concern to me.

I told Chuck that I had discovered the cause of the water drainage problem and that this allowed the technicians at TBS to remedy the captured water problem. I also stated that I was not content with the boat simply being dried out and shrink-wrapped, and I was clear that this decision was not made out of a lack of confidence in the Bolingbrook, TBS technicians, but rather out of my concern for the condition of the boat.

I stated my concerns about the long-standing water and the resultant mold and black organic growth inside the entirety of the hull, bilge and compartments.

I added my concerns about mold under the center passenger seat and possibly being not only under the other seats, but also in other areas of the boat not easily viewed or totally hidden given the construction of the craft. I informed Chuck that I was seriously concerned because water had been standing in the boat for at least three years, and that because of this situation there may be other areas and parts of the boat that have been compromised as a direct result of this condition despite this being a predominantly fiberglass boat.

At the time, I did not mention my own research into previous complaints made by other owners, indicating hull cracking and splitting with various boats, but I do have concerns about hull-degradation due to the entombed water. I also expressed my frustration that I had to go to TBS to diagnose the problem for them.

What I did not say to Chuck on the phone at the time was that I, as well as my wife, got the distinct impression, that the problem had already been identified, yet not repaired. I cannot prove that this is the case. However, I would be surprised if I were the first person to consider putting a phone down in a hole to take pictures of objects that cannot be viewed directly. At the end of our brief conversation, I clarified that I had multiple concerns, was of the belief that the boat was compromised and damaged due to standing water.

Specifically, I stated to Chuck that I did not want the boat back. I believe our brief conversation ended amicably albeit without resolution. I know that I was clear that I would await a response from him regarding my concerns and expectations. In summary, my concerns begin with the documented service record of this boat and the expenses incurred to maintain it despite having been under warranty for two years. I have spent a considerable amount of my personal time maintaining, cleaning, washing and sanitizing the craft while being hampered by an unknown problem and a hazardous condition.

I have employed other services to address and repair moisture-related damage to the boat's cover; this started within one year of owning it despite the fact that I do not trailer the craft with the cover on it except for short, non-highway speed travels.

I have had interruption of boating activities and vacation time because of other electrical problems. I have had to endure the intangible and immeasurable matters of my time, frustration, aggravation, and dissatisfaction with the craft's seemingly unexplainable ailments.

I am unwilling to take back into my possession a craft that, having had these difficulties, may continue to have the same or similar problems and may yield even more problems and challenges in the future without any warranty and assurance. On this point I offer the service records of the boat since , which illustrate several instances of electrical problems and part failure due to moisture and corrosion damage.

I opine that these are unusual for a boat that at the time was less than three years old and in one instance had only been in use for a few months. The following list of documented problems is proof of the boat's history of moisture and corrosion-related problems.

Moreover, two repairs of the boat's trailer-able cover due to the deterioration and unraveling of factory stitching in and He stated that he was authorized to replace the center seat cushion of the boat, clean the boat, and shrink-wrap the craft. I informed him that I did not wish this service to be performed at this time because I had still not resolved the matter entirely with the Warranty Department.

He said he understood and that he would re-cover the boat and return it to the storage yard until he had been instructed otherwise. A few days later I contacted TBS to request a copy of all service invoices on this craft. Adam handled this request in a reasonable amount of time. I trust I have clarified my concerns, and adequately explained the situation with this craft and my reasons for not wanting it back in my possession.

I believe that there is adequate research and literature on the matters of mold and mildew contamination that support caution in this matter. Even major industry and health leaders including OSHA, the EPA and the CDC have taken a firmer and more cautionary stance on previously-relied-upon methods in eradicating mold and mildew-related problems.

I admit that at this time I have researched very little on the effects of standing water in the bilge area of fiberglass boats. However, I have read enough to believe that my concerns are warranted given the size of this boat, its horsepower ratings, and performance capabilities. I realize that boats are designed to keep out water and even to hold water at times.

However, I also realize after having owned boats all of my life that water must be removed as soon as possible � everyday if possible. After all, watercraft are not bathtubs, and they do contain materials used in construction that are not compatible with continuous water contact.

And, as I have stated before, this boat has cost me time, money, and aggravation for a problem not of my making. I assume it is now costing Tracker time and money. I would prefer to resolve this as expeditiously as possible and avoid spending any additional time and money in disagreement, or litigation. I await a response from whoever has authorization to address this temporary lack of communication.

Aside from the problems encountered and the required repairs, I have been quite satisfied and even impressed with the quality of the craft and its performance. It has made my time on the water all that more enjoyable. It has even made time on land enjoyable - answering questions and receiving compliments about the boat, and having encouraged others to consider a Tracker or Nitro if they are in the market.

I hope this current matter resolves itself quickly as in the past. I have been diligent in maintaining the craft despite its internal handicap.

I would prefer to tell others that Tracker stands behind their promise of quality and service, rather than the opposite. I would buy another Tracker boat when the time comes.

However, I can only do that if I am assured that customer satisfaction and standing behind the product it is still a top priority for Tracker. My Nitro Z-7 is coming apart from the inside. The stringers have cracked and detached from the hull. Nitro says they will do nothing and my insurance won't cover cause a surveyor reported it was due to poor layup process during manufacturing.

Sandy from corporate said, "We will do nothing. I have a nitro z7 that had its fiberglass broken from the front roller. Brought it to dealer, they said they had never seen it happen before. I went over to another nitro z7 in the parking lot, it had the same crack. I then went inside and looked at the one in the showroom. It already had the marks from the roller. I went to bass pro and found the same marks on theirs.

I called Tracker, sent them a video. They said it was my fault. It's too bad. They wouldn't even try to work with me. I would not recommend this boat. Purchased a new Tracker Grizzly all welded from Bass Pro. When you look closely at the welds you can easily see why the welds break so easily.

Tracker Marine fixed the boat under warranty, unfortunately the spot welds used to fix deformed the aluminum and looked like garbage. Happiest day for me was when I got rid of that piece of trash. It's sad but anything Tracker Marine touches turns to garbage. I just hope they don't kill the quality of those brands or at least don't drag them down to a nitro quality boat.

I am looking for the port side console for my Z7 nitro boat. I did not have the opportunity to order this option with the boat. I have not been able to get a answer as to why the price difference.

After checking with different boat parts suppliers I have no other options but to pay the inflated price. I have not been able to get to the right person at Tracker Boats to get a answer - just put on hold and transferred and put on hold again.

Well, resolved one problem and then it happened. I got a crack major by my throttle and when the guy came to pick up the boat, he ripped up the carpet so he could make extra money and showed me the cracks that he thought I would have inside the rod lockers. Yes both of them. I called Tracker and they denied my claim.

Well I got really mad and they said the same thing to me as the last time. The original crack looks horrible inside the rod lockers - both of them. Only part of the carpet was repaired and the wrong color. Dark grey vs light grey and probably not even carpet from Tracker. I tried to stay loyal but I will never own a nitro anything again. It makes me sick to my stomach to think of how I was treated that 7 months later, it still makes me mad.

Due to bad weather company response was slow but they stood behind the product and covered under warranty and I am a satisfied customer. I would buy another boat from them. I am disappointed. I have a Nitro Z7 and had a problem this year. When loading boat I broke through the Fiberglass right at the bow under the rub rail.

The glass was hollow underneath the most important part of the boat in my opinion. I know of one other boat where it is hollow in the same spot. I turned the bill into Tracker and they denied my claim because they said it was impact related. Well if the job was done right, the light impact would not be a issue but hollow is hollow and nothing to support the glass.

Hmm, I will look a little closer before I buy another starting with tap, tap, tap on the bow looking for hollow spots. Also sharp corner rear bottom of boat by drain is easy to damage, gel must have come off a small stump but gel broke about the size of a half dollar. There was only one in the parking lot and was told that I would get a brand new black colored boat because the one in the lot had been there for a while.

I returned two days later and was given the boat in the parking lot that had been sitting there for a while. The boat smelled like mildew and I was told that that was the only one I could get unless I wanted to wait a month and a half.

So I had no other choice but to take that boat. Bringing it home, I attempted to back the boat in the drive way but for some reason the breaks locked up on the trailer every time I tried to back it in.

In order for it to work, I would have to slightly go forward and back up again until they became unlocked. I had to put a pin in the override on the trailer tongue to get it to work every time. I used that boat one time on the lake and for trolling for 5 hours. I took it home and put it back on the lake a week later only to realize the trolling motor did not work. I took it out of the water and brought it back home to realize that some how the prop on the trolling motor over heated and melted to the shaft.

It flashed on and off which told me there was a loose connection in the circuitry. The antenna for the Lowrance came off which Tracker pt on. I called the service department and took the boat in to have it fixed. Three weeks later, I received the boat back and was told that the trolling motor had the wrong amp power supply attached, the trailer had a busted cable, and they had to fix a short on the depth finder.

All from a brand new boat that I used for 5 hours. I called corporate head quarters and requested a new boat but no one ever got back to me. So I figured every thing was fixed and put it in the water once again only realize that the depth finder is still not working properly. With only using the boat for approximately 7 hours, I put the boat in storage for the winter and winterized the engine. Over the winter, I picked up a new Lowrance fish finder for the front of the boat and had Tracker install it.

Well, depth finder works sometimes and the fish finder never works. While bringing the boat out of storage, the cover ripped in the back and was flapping every where. It was under warranty. Thank goodness and I received a new cover. I used the boat in for maybe 6 hours due to me being a RN and a hectic work year. While driving down the highway, the carpet flew up and ripped off the buttons holding it on so I just removed the carpet because I did not want to loose time on the water.

I put it back into storage for the winter and picked it up in Ever since I had the boat, I always had to tighten up the windshield screws and the front windshield door never closed properly. This year, the class from the windshield started to pop out and the windshield started to drop out screws.

The depth finder still not working, the windshield starting to fall out, the Lowrance not working properly, and I started to notice a strange smell coming from the trailer. When we got back to Chicago, Il, I noticed that the back driver side wheel looked a little off but was not sure.

I used the boat locally for two months always noticing that smell. I took it back into Tracker Marina 10 minutes away, this time to get winterized so I could take it to Fort Benning when I got back in Dec. On my way, there I was informed by another motorist that my boat was on fire. I looked back and I had smoke pouring out of my driver side back axle which was right under my gas tank of the boat.

I pulled over quickly and pressed my On Star emergency button and had the fire department there in no time. The bearings of the wheel had come out overheating the axle, and the wheel was ready to fall off. I had a police and fire department escort to the service center. I was leaving for Fort Sam, Tx.

I left it there to get winterized and fixed for 4 months while I was gone and picked the boat up in Dec of and headed down to Fort Benning, Ga. While just outside of Nashville, Tn. I was informed that my hubcaps flew off the trailer a ways back and I pulled over to check the axle out. The smell was coming from the axle once again and I put some ice on the wheel well that evaporated instantly.

The next day, I took into Nashville's Tracker Boat which repacked the bearings and replaced the hubcaps. I got down to Columbus, Ga. I called the corporate office once again and spoke with Shelly B. My wife and I have called her back 10 times now for the last week and a half and have gotten no response back. My boat not but 2. I will never, ever, ever, ever, buy another Tracker again. Is there a lemon law and phone number that some one can help me fix this problem?

Pontoon Docking Lights For Boats 60 Diy Jon Boat Foam Experiment Small Skiff Center Console Unit Ncert 10th Maths Book Online Game