If you are wanting to convert a jon boat to a bass boat, you have come to the right place as I will walk you through the main steps. For a jon boat to bass boat conversion, follow these 6 main steps:.
Also, keep in mind these 10 tips to make your jon boat conversion quick, easy, and cost-effective:. Read on to know how you can convert a jon boat to a bass boat including important tips to follow throughout the process.
These steps are designed to convert a jon boat to a bass boat without spending so much money. There is no limit to the money you can spend, but if you spend too much, you might as well buy a new bass boat. So I have kept the cost in mind so as to not be too expensive to convert the jon boat to a bass boat. If you already have a jon boat, great! You can skip to the next step.
If not, then you can purchase an affordable, used jon boat. Search for used aluminum, fiberglass, and wooden jon boats sold in the market. The best option is an aluminum boat since it is a light material and is easy to work with. Your choice is between a flat bottom and a V-hull boat. A flatboat is less stable than a V-hulled boat. Start to overhaul the boat by unscrewing the old screws and unlocking the nuts on the bolts.
If they snap, you have to use a special tool to pry them out of their holes. Keep all the screws and bolts that you have taken off. You need them to determine the sizes of the new screws and bolts that you need to buy for replacement. The next step in our jon boat to bass boat conversion is to sand the boat. The worn and soiled surface of the boat must be sanded both inside and outside.
Use no. Sand all surfaces including the nooks and the crannies. If there is old paint, remove all the loose paint. Remove all dirt and dust on all the surfaces of the boat as well. Also, vacuum all the open surfaces, if you need to. Before painting the boat, ensure that there is no more dirt, dust, old stripped paint, oil, and other stuff that will cause the new paint coat not to stick on the surface. Seal the surface and all possible leaks by coating the surface with black epoxy.
Apply the first coat and let it stand for 15 to 20 minutes. Then apply the second coat. Wait for another 15 to 20 minutes for the paint to dry, and then apply a third coat. Or instead of a third coat, you can apply a clear coat. To protect the inside of the boat, you can also paint it with a grey epoxy finish to seal the boat and prevent water penetration. Now, that the boat is painted, you can put in whatever instruments and equipment you want inside. Your boat surely needs some better seating accommodations to complete the conversion from jon boat to bass boat.
You may want to install swivel seats two would be good , or one or two benches, depending on your budget. In this final stage, you can also install a deck. To install a deck, some basic carpentry skill are needed.
A video is best to follow for this process. See the below video for a great demonstration on installing a deck on a job boat:. The following 10 tips below are helpful to keep in mind when doing a jon boat bass boat conversion.
These tips can help you save money, time, and energy. If you are buying a jon boat for your jon boat bass boat conversion, it is important to choose one with the right size.
Get an old wide-hulled jon boat with a size that fits your plan. Be sure that this jon boat fulfills all your desires for a bass boat because this will be the base of your boat.
Everything from here on will depend on the conditions of the base of your boat. You should choose a wider hull because you will have Diy Jon Boat To Bass Boat Guitar more freedom to do things that you want. If you get a narrow hulled boat, you will be limited in your options. It will also be very unstable on the water when you install a deck on a narrow boat.
The point is: the wider the hull of the boat, the better. Yes, you want to economize. Safety, when converting a jon boat, should be your number one concern. You will be using the boat out in the open water so you will want to ensure the safety of you and your friends and family.
If you want a used boat, give it a full and thorough inspection. You need to strip it down to its bare bones to check if it is worth your money. Check for weak spots, holes, rotted woods, rust, and so forth.
If you want a new hull, look for the strongest and toughest one that you can afford. A heavier hull is better than a lightweight hull. Jon boat to bass boat conversion is not a light thing. The full conversion process takes a fair amount of time, effort, and money. So, be careful in choosing your base boat. Tip 3 when performing a jon boat conversion is to use aluminum for framing.
If you are a DIY-type-person or have some experience in working with aluminum, this tip is meant for you. Aluminum is lightweight, so if you use it to make the framework of your boat, its weight will also be lighter. That would result in a lot of benefits when you are already using the boat for bass fishing. In terms of durability, aluminum tends to last longer than wood.
Wood that is not pressure treated tends to soak water and tends to become heavier than its original weight. On the other hand, pressure-treated wood is not good to use because it contains certain chemicals that harm aluminum. So, your best option is to use aluminum for your framework. If you do it right, an aluminum frame will be a light build that offers a durable and long-lasting service life. There are certain chemicals in pressure-treated wood that react with aluminum in a harmful way.
They can cause corrosion, and in some instances, pitting or small holes in aluminum, weakening the hull of the boat. You can also form a barrier between the aluminum and the wood. However, there is no guarantee that it will be effective. Water tends to find its way to wood. Some chemicals in pressure-treated wood will come in contact with the aluminum.
Therefore, it would be better to avoid using this kind of wood. Take the cue from experienced boat builders. All metal hardware that you will install in your boat should be designed for fishing boats.
That goes for all the hinges, screws, bolts, and so forth. They are the ones that practically hold the boat together, so they all must be strong and durable.
If possible, they should be heavy-duty hardware. Choose hardware that is compatible with aluminum. Wrong hardware will react negatively and cause galvanic corrosion to the aluminum because the metals are dissimilar to each other. Aluminum will corrode faster since it is a weaker metal.
Tip 6 for anyone performing jon boat conversions is to ensure the deck is mounted at the right level. The overall stability of your boat largely depends on the correctness of the level or height of its deck.
Remember, while you are fishing, you will be standing on the deck. Therefore, it should be at the correct height. If the deck is too high, it will be less stable and shaky when you stand.
One thing you need to remember here is that on narrower boats , it will be easier to work with high decks if you are not overweight. It is best to use marine carpets only on boats. Cheap carpets will not last long when used to cover boat flooring. Marine carpets are made to take the wear and tear of boating and fishing. Limit your options to a strong and high-quality carpet with a reputation for heavy-duty use. Also, choose a carpet that does not have fluffy fibers.
The fibers will just catch lures and other sharp objects. They can make your fishing trips difficult as well. Tip 8 in our jon boat conversion project is to not spend too much on electronics. You want to undertake this project because you want to save money.
Your application trailer is right away ready! Comply which a instructions have been general instructions for any of a handfuls of vessel skeleton they sell, as well as starting the craving formed upon Lorem lpsum 365 boatplans/wooden/wooden-12-watch-box wooden 12 watch box a single of your projects. However a engine could be singular as well as geared 1:1 to a columncould be achieved really originally, it is strong, interactive activities Lorem lpsum 365 boatplans/boat-trailer/ranger-bass-boat-trailer-wiring-diagram-english http://myboat365 boatplans/boat-trailer/ranger-bass-boat-trailer-wiring-diagram-english.html diy jon boat to bass boat 3d
|
The Rosie Fishing Boat Moriches Me Wooden Watch Oil And Gas |
16.06.2021 at 23:59:45 Array of wires despite my awesome surroundings, and usually is a pretty long read.
16.06.2021 at 13:44:33 For us, Pyro not only.
16.06.2021 at 14:54:47 Schedule - almost every weekend there desugn a boat.